ICEDGE=RISING, ICEVCTRL=EVERYEDGE, CMOA=NONE, MODE=OFF, CUFOA=NONE, PRSSEL=PRSCH0, COFOA=NONE
CC Channel Control Register
| MODE | CC Channel Mode 0 (OFF): Compare/Capture channel turned off 1 (INPUTCAPTURE): Input capture 2 (OUTPUTCOMPARE): Output compare 3 (PWM): Pulse-Width Modulation |
| OUTINV | Output Invert |
| COIST | Compare Output Initial State |
| CMOA | Compare Match Output Action 0 (NONE): No action on compare match 1 (TOGGLE): Toggle output on compare match 2 (CLEAR): Clear output on compare match 3 (SET): Set output on compare match |
| COFOA | Counter Overflow Output Action 0 (NONE): No action on counter overflow 1 (TOGGLE): Toggle output on counter overflow 2 (CLEAR): Clear output on counter overflow 3 (SET): Set output on counter overflow |
| CUFOA | Counter Underflow Output Action 0 (NONE): No action on counter underflow 1 (TOGGLE): Toggle output on counter underflow 2 (CLEAR): Clear output on counter underflow 3 (SET): Set output on counter underflow |
| PRSSEL | Compare/Capture Channel PRS Input Channel Selection 0 (PRSCH0): PRS Channel 0 selected as input 1 (PRSCH1): PRS Channel 1 selected as input 2 (PRSCH2): PRS Channel 2 selected as input 3 (PRSCH3): PRS Channel 3 selected as input 4 (PRSCH4): PRS Channel 4 selected as input 5 (PRSCH5): PRS Channel 5 selected as input |
| INSEL | Input Selection |
| FILT | Digital Filter |
| ICEDGE | Input Capture Edge Select 0 (RISING): Rising edges detected 1 (FALLING): Falling edges detected 2 (BOTH): Both edges detected 3 (NONE): No edge detection, signal is left as it is |
| ICEVCTRL | Input Capture Event Control 0 (EVERYEDGE): PRS output pulse, interrupt flag and DMA request set on every capture 1 (EVERYSECONDEDGE): PRS output pulse, interrupt flag and DMA request set on every second capture 2 (RISING): PRS output pulse, interrupt flag and DMA request set on rising edge only (if ICEDGE = BOTH) 3 (FALLING): PRS output pulse, interrupt flag and DMA request set on falling edge only (if ICEDGE = BOTH) |
| PRSCONF | PRS Configuration |